1/4" DOT Approved Air Suspension Line. Sold Per MTR

px02 12volt compressor 50% duty cycle, 0-150psi

Px01 12v Small Air compressor, Oil less compressor can be mounted vertical or horizontal for easy installation

Px02 12volt compressor 1/4 hp 1.5cfm free flow 50% duty cycle, recommended working pressure 0-150psi

PX-06 12v Air Suspension Compressor, 100% duty,Oil less compressor can be mounted vertical or horizontal for easy installation

Px07 12 Air Compressor. 100% duty cycle Suitable for industrial and automotive use

Wiring Cable for our 12 Volt Air Compressors PX01

px07 24volt compressor 3/4 hp engine 100% duty cycle

PX-06 24v Air Suspension Compressor, 100% duty,Oil less compressor can be mounted vertical or horizontal for easy installation

PX07 24v Air Compressor 100% duty cycle

Aluminium air tank 5 port 3 Gallon (approx 9 litres)

Already have a compressor and need to add a tank and accessories. This 3 gallon tank is the right choice.

3/8" DOT Approved Air Suspension Line.

BOSS 4 Valve Air Suspension Valve Block with 1/2" ports, Gauge Port.

Ideal for rear only, front only or split.

Already have a compressor and need to add a tank and accessories. This 5 gallon Aluminium tank is the right choice.

2/3 way compressed air manifold to supply multiple air lines from a single source by threading pneumatic fittings into the ports.

Dual Needle Gauge 200psi with fittings and 10mtrs of Airline

Twin Valve Easy Install Fitting Kit

This kit is used to control Load Assist Kits from inside your cab without the need for a tank and electric valves. Simple installation and controls bags independently up and down Includes: 1 x PX-01 12V BOSS Air Compressor. 1 x Stamped stainless steel gauge panel. 2 x Pneumatic Push Buttons for dropping each bag. 1 x 12V momentary switch for compressor. 1 x BOSS 200psi Dual Needle back-lit Gauge. 10 meters of 1/4” J844 DOT Airbrake line. 2 x 1/4” push connect check valves. 3 x Y Connectors. 2 x T Connectors. 4 x 1/4” female push fittings for gauge and buttons. 10 x Cable Ties. Instruction Sheet.

New design air over strut camber plate (often called Bell Top) for front airbag struts

Aluminium tank 1 Gallon, 3 port silver (approx 3 litres) H130mm x W95mm x L400mm with drain

Aluminium airtank 5 port silver 5 Gallon (approx 15 litres) L750mm x H220mm x W180mm

Airbag Articulation Kit for 4x4 use, bag to bag air bypass kit for off-road use only.

2.0" body / 0.85" shaft airplate shock 08/14 painted install as strut or bag over 305mm shock body = small front wheel drive cars and new coilover style pickups

2.0" body / 0.85" shaft airplate shock 12/20 painted install as strut or bag over 305mm shock body = small front wheel drive cars and new coilover style pickups

2.0" body / 0.85" shaft airplate shock 14/22 painted install as strut or bag over 355mm shock body = Most medium sized front wheel drive cars and some rear applications

2.0" body / 0.85" shaft airplate shock 18/31 painted install as strut or bag over 460mm shock body = BMW front and many front/ rear applications

This kit is suitable to run air lockers, small air tools, small tyres and situations where reasonable air volume is needed. Great tank to mount alongside chassis. Includes: 1 x PX-02 1/4 hp 12 volt BOSS Air Compressor 1 x AT-02 2 Gallon/ 6ltr Boss Aluminium “Hotdog” Air Tank 1 x 70-100psi Pressure Switch 1 x 700mm Teflon Coated Stainless Steel Braided Hose 1 x 100% Duty Solenoid 1 x Check Valve 1 x Flare Fitting 1 x Brass “T” for pressure switch 1 x Drain Tap Instruction Sheet

This onboard air kit will give you full control of your Load Assist Air Bag

The “Ducks Nuts” in onboard air kits, this kit will give you everything,

2400 BOSS Airbag Bare Fully Compressed - 65mm with 6mm ends fitted Max Diameter- 135mm (widest when fully compressed) Max height - 182mm Max working pressure 0-160psi Test pressure - 480psi Burst pressure - 750psi

#2400 BOSS complete airbag 2400lb or 1136kg capacity. Suitable for “Bag over” applications and as a stand alone air bag in Automotive suspension.

2401 BOSS Airbag Bare Fully Compressed - 55mm with 6mm ends fitted Max Diameter- 135mm (widest when fully compressed) Max height - 110mm Max working pressure 0-160psi Test pressure - 480psi Burst pressure - 750psi

2403 BOSS Airbag Bare

#2403 BOSS complete airbag 2400lb or 1136kg capacity. Suitable for “Bag over” applications and as a stand alone air bag in Automotive suspension.

2500 BOSS Airbag Bare Fully Compressed - 65mm with 6mm ends fitted Max Diameter- 155mm (widest when fully compressed) Max height - 210mm Max working pressure 0-160psi Test pressure - 480psi Burst pressure - 1000psi